Gate Access Starter Kit
search
  • Gate Access Starter Kit
  • Gate Access Starter Kit
  • Gate Access Starter Kit
  • Gate Access Starter Kit
  • Gate Access Starter Kit
  • Gate Access Starter Kit
  • Gate Access Starter Kit
  • Gate Access Starter Kit
  • Gate Access Starter Kit
  • Gate Access Starter Kit
  • Gate Access Starter Kit
  • Gate Access Starter Kit

Gate Access Starter Kit

€945.81

Control a vehicle gate using the connected intercom and authorize gate access with license plate unlocking when paired with a compatible Protect AI camera*.

Quantity
Delivery time unknown

Gate Access Starter Kit

Control a vehicle gate using the connected intercom and authorize gate access with license plate unlocking when paired with a compatible Protect AI camera*.

  • (1) Gate Hub
  • (1) Intercom
  • (1) PoE++ adapter
  • (2) 2-wire PoE extenders
  • *Remark. License plate recognition is supported on Protect AI series cameras, excluding 360 lenses.

Compatibility

  • UVC-AI Bullet
  • UVC-AI-DSLR
  • UVC-AI-Pro
  • UVC-AI-Theta
UA Hub Gate Mechanical
Dimensions 175 x 126 x 26mm (6.9 x 5 x 1")
Weight 460g (1lb)
Housing material Polycarbonate
Edit Din rail (included)
Hardware
Network interface (5) 10/100/1000 Base-T
Feeding method PoE++
Max. power consumption
  • without PoE output: 22W
  • With PoE output: 50W
PoE input 50V DC, 1A
PoE output PoE passthrough, (4) PoE, 50V DC, Max. 28W
Knob (1) factory setting
Digital input Gate exit request, gate position, side door exit request, side door position, emergency
Dry output relay
  • (2) Drive: nominal 30 V DC, up to 1A
  • (1) Aux: nominal 30V DC, up to 1A
Side door lock power relay: 12V DC, up to 1A
Operating environment
  • Can only be used indoors with the device itself
  • Outdoor use with waterproof connection box
Ambient temperature -30 to 60° C (-22 to 104° F)
Relative air humidity 5 to 90% non-condensing
Certifications CE, FCC, IC
LEDs
PoE in
  • Solid white: Awaiting adoption
  • Solid blue: Approved, device is ready
  • Flashing white/blue: Firmware is being upgraded
PoE out
  • Off: Not connected or no data connection
  • Solid white: Connected and data link on
Input terminals
  • Off: no wire
  • Solid white: Wire connected
  • Flashing white: Active signal
Output relays
  • Off: no wire
  • Solid white: Wire connected
  • Flashing white: Relay activated
UA Intercom Mechanical
Dimensions 324.8 x 113.7 x 28.3 mm (12.8 x 4.5 x 1.1") Device weight: 965 g (2.1 lb)
Clamp: 445g (1lb)
Housing material Aluminum alloy, UV stabilized polycarbonate, glass
Fastening material Powder-coated stainless steel
Edit
  • Wall mount, gooseneck base adapter (included)
  • Corner surface mounting, flush mounting (optional)
  • Sunshade kit (optional)
Weather resistance IP65
Hardware
Network interface (1) GbE RJ45 port
Connectivity
  • Bluetooth 4.2
  • NFC
Power method
  • PoE
  • UL 294 Power-limited Class 2 PSU
  • UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range 48VDC
Max. power consumption 13W
ESD/EMP protection Air: ±15kV, contact: ±8kV
Sensors
  • Proximity sensor
  • AS sensor
Camera
  • 3264x2448, 8MP
  • H: 79.4°, V: 97.5°, D: 118.2°
display 177mm (7") diagonal
Resolution 1024x600 (16:9)
Display brightness Max. 1000 nits (average)
Touchscreen technology Capacitive multi-touch
Microphone Yes
Speaker (1) 4 ohms, 2W
LEDs
  • (1) LCM low temperature indicator: orange (LCM disabled when lower than -25°C but system functions normally)
  • (1) LED spotlight
  • (13) LED backlit keyboard
Knob (1) Factory reset
NFC frequency 13.56MHz
NFC read range 30mm
NFC standards ISO 14443A, 14443B, 15693
NFC technology
  • NFC Tag 1,2,3,4,5
  • MIFARE Classic
  • MIFARE Plus
  • MIFARE Ultralight
  • MIFARE DESFire
Ambient temperature
  • Device: -30 to 60° C (-22 to 140° F)
  • Display:* -25 to 60° C (-13 to 140° F)
  • *The display will turn off if the ambient temperature rises above or below the operating temperature of the display, but other functions will continue to operate. (Effective after firmware v 1.0.66)
Operating environment Out of use
Relative air humidity 5 to 90% non-condensing
Software information The software version of a product can be checked at https://unifi.ui.com
UL 294 level
  • Destructive Attack: Level I
  • Line protection: Level I
  • Stamina: Level I
  • Standby power: Level I
UL 294 statement
  • Compliance with the IEEE 802.3 specifications has not been verified as part of UL 294.
  • The equipment is intended to comply with section of the National Electrical Code, ANSI/NFPA 70,
  • Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
Requirements for PoE cabling
  • Cable 5e cabling is the minimum recommended performance category. The performance category used must correspond to the transmission speed required at the installation location.
  • The minimum gauge of conductors allowed to be connected between the PSE or power injector and the PD is 26 AWG (0.13 mm 2 ) for patch cables; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade Grade assignment: I
Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number and date of issue and/or revision level UA Intercom, V01
UACC-Extender-2Wire-PoE-Tx/Rx Mechanical
Dimensions 40 x 105 x 25mm (1.6 x 4.1 x 1")
Weight
  • PoE in: 77g (2.7oz)
  • PoE out: 79g (2.8oz)
Housing material Polycarbonate
Fastening material Polycarbonate
Hardware
Network interface
  • (1) 10/100 MbE
  • (1) Homeplug AV
Feeding method PoE++
Max. power consumption 3W (without PoE output)
PoE input (1) PoE++, 50V DC, Max. 1.2A
PoE output (1) PoE+, 48V DC, 0.72A
ESD/EMP protection Air: ±8kV, contact: ±4kV
LED white
Ambient temperature -10 to 40° C (14 to 104° F)
Relative air humidity 5 to 95% non-condensing
Certifications CE, FCC, IC
U-PoE++ Specifications
Fashion model U-PoE++
Dimensions 106 x 63 x 34 mm (4.2 x 2.5 x 1.3")
Weight 210g (7.4oz)
Output voltage 48V DC @ 1.25A
LAN activity indicator No
Gigabit LAN port Yes
Remote reset option No
Reset button No
Allowable voltage 100—240V AC @ 50/60Hz
Input current
  • 1.3A @ 120V AC
  • 0.75A @ 230V AC
Inrush current
  • ≤100A peak @ 120V AC
  • ≤200A peak @ 230V AC
Efficiency 85+%
Exit ripple 1% max.
Switching frequency 65kHz
Regulations ≤ 1%
Tax regulation ≤ 3%
2-pair power supply No
4-pair power supply Pins 1, 2, 4, 5 (+) and 3, 6, 7, 8 (-)
AC connector IEC-320 C6
Data in / PoE Shielded RJ45 connection
Overvoltage protection Difference and common mode
Pinch protection 11V data, 60V Power
Max. peak discharge 1500A (8/20 μs) power
Peak pulse current 36A (10/1000 μs) data
Shunt capacitance ≤5 pF data
Response time ≤1 ns
Power method Universal AC input, 100-240 VAC, 50/60 Hz
Power supply AC/DC
Supported voltage range 100—240V AC
Max. PoE+ wattage per port by PSE 60W
Ambient temperature 0 to 40° C (32 to 104° F)
Storage temperature -30 to 70°C (-22 to 158° F)
Relative air humidity 10 to 95% non-condensing
Certifications CE, FCC, IC, UL, UKCA, KC, CCC, KC, RoHS
005-01534

Specific References

  • Name : 14 day return policy - 2 year warranty
  • Description

    Your RMA request has been submitted. We will pick up the item you wish to return within 6 days. We hope you understand that we only accept items for return if they have not been used or tampered with. Original packaging and accessories also need to be returned along with item.

    • Click here to get more details

You might also like