G3 Starter Kit Pro
€759.87
Starter kit that provides complete entry and exit control for a single door with two readers and support for Apple Touch Pass.
G3 Starter Kit Pro
Starter kit that provides complete entry and exit control for a single door with two readers and support for Apple Touch Pass.
- (1) Door hub
- (1) G3 Pro Reader
- (1) G3 Reader for door opening, or access for an additional door (second Hub required)
- (2) Bag key rings
| UA Hub Door | |
| Mechanical | |
| Dimensions | 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3") |
| Weight | 363 g (12.8 oz) |
| Housing material | Polycarbonate |
| Mounting material | Polycarbonate |
| Hardware | |
| Network interface | (5) 10/100/1000 Base-T |
| Feeding method |
|
| Max. power consumption |
|
| PoE input | 50V DC, 1A |
| PoE output | PoE passthrough, (4) PoE, 50V DC, total 20W |
| LEDs | White/Blue |
| Knob | (1) Factory reset |
| Digital input | Request to Exit/Request to Enter/Remote Unlock/Door Position Sensor |
| Dry exit |
|
| Powered output relay |
|
| Operating environment | For indoor use only |
| Ambient temperature | 0 to 40° C (32 to 104° F) |
| Relative humidity | 5 to 95% non-condensing |
| UL 294 level |
|
| UL 294 Statement |
|
| CAN/ULC-60839-11-1 Rank | Rank Assignment: 1 |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Wiring Information | |||||
| Wire gauge (AWG) requirements | Total length to device | Output load current at 12V DC | |||
| 100mA | 250mA | 500mA | 1A | ||
| 6.1 m (20 ft) | 22 | 22 | 18 | ||
| 15.2 m (50 ft) | 22 | 22 | 18 | ||
| 30.5 m (100 ft) | 22 | 18 | 18 | ||
| UACC Cable Door Lock Relay (18 AWG) is recommended. | |||||
| PoE Cabling Requirements | The minimum gauge of conductors that may be connected between the PSE or current injector and the PD is 24 AWG (0.21 mm2) for horizontal or riser cables. |
| UA-G3 | |
| Mechanical | |
| Dimensions | 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") |
| Weight | 82 g (2.9 oz) |
| Housing material | Polycarbonate, glass |
| Mounting material | Aluminum alloy |
| Assembly | In wall, hallway cupboard |
| Weather resistance | IP55 |
| Hardware | |
| Network interface | (1) 10/100 MbE RJ45 port |
| Connectivity |
|
| Feeding method |
|
| Supported voltage range | 48V DC |
| Max. power consumption | 5W |
| ESD/EMP protection | Air: ±15kV, contact: ±8kV |
| Sensors | Proximity sensor |
| Loudspeaker | (1) 8 ohm, 0.7W |
| LEDs | (1) Status light |
| Knob | (1) Factory reset |
| NFC frequency | 13.56 MHz |
| NFC reading range | < 30 mm |
| NFC technology |
|
| Operating environment | Outdoor use |
| Ambient temperature | -30 to 45° C (-22 to 113° F) |
| Relative humidity | 5 to 90% non-condensing |
| Software information | The software version of a product can be checked at https://unifi.ui.com |
| UL 294 level |
|
| UL 294 statement |
|
| PoE Cabling Requirements |
|
| CAN/ULC-60839-11-1 Grade | Number assignment: I |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| LED | |
| System |
|
| UA-G3 | |
| Mechanical | |
| Dimensions | 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") |
| Weight | 82 g (2.9 oz) |
| Housing material | Polycarbonate, glass |
| Mounting material | Aluminum alloy |
| Assembly | In wall, hallway cupboard |
| Weather resistance | IP55 |
| Hardware | |
| Network interface | (1) 10/100 MbE RJ45 port |
| Connectivity |
|
| Feeding method |
|
| Supported voltage range | 48V DC |
| Max. power consumption | 5W |
| ESD/EMP protection | Air: ±15kV, contact: ±8kV |
| Sensors | Proximity sensor |
| Loudspeaker | (1) 8 ohm, 0.7W |
| LEDs | (1) Status light |
| Knob | (1) Factory reset |
| NFC frequency | 13.56 MHz |
| NFC reading range | < 30 mm |
| NFC technology |
|
| Operating environment | Outdoor use |
| Ambient temperature | -30 to 45° C (-22 to 113° F) |
| Relative humidity | 5 to 90% non-condensing |
| Software information | The software version of a product can be checked at https://unifi.ui.com |
| UL 294 level |
|
| UL 294 statement |
|
| PoE Cabling Requirements |
|
| CAN/ULC-60839-11-1 Grade | Number assignment: I |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| UA-Pocket | |
| Mechanical | |
| Dimensions | 84 x 39 x 7.4 mm (3.3 x 1.5 x 0.3") |
| Weight | 16 g (0.56 oz) |
| Housing material | Polycarbonate, stainless steel, silicone rubber |
| Weather resistance | IP54 |
| Hardware | |
| NFC frequency | 13.56 MHz |
| NFC technology |
|
| Ambient temperature | -10 to 45° C (14 to 113° F) |
| Relative humidity | 10 to 90% non-condensing |
| Certification | CE |
005-01538
Specific References
- Name : 14 day return policy - 2 year warranty
-
Description
Your RMA request has been submitted. We will pick up the item you wish to return within 6 days. We hope you understand that we only accept items for return if they have not been used or tampered with. Original packaging and accessories also need to be returned along with item.
Click here to get more details
Starter kit that provides complete entry and exit control for a single door with two readers and support for Apple Touch Pass.