UA G3 Starter Kit
search
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit
  • UA G3 Starter Kit

UA G3 Starter Kit

€373.35

A simple, all-in-one kit for UniFi Access, designed to manage one door with one reader. Supports seamless installation and Apple Touch Pass for modern, secure access control.

Quantity
delivery time unknown

UA G3 Starter Kit

A simple, all-in-one kit for UniFi Access, designed to manage one door with one reader. Supports seamless installation and Apple Touch Pass for modern, secure access control.

  • (1)By Hub Mini
  • (1)G3 Reader
  • (2)Pocket Keyfobs
UA-Hub-Door-Mini
Mechanical
Dimensions 113 x 66 x 27.6 mm (4.4 x 2.6 x 1.1")
Weight 190 g (6.7 oz)
Housing material Polycarbonate, metal
Hardware
Network interface (3) GbE RJ45 ports
Feeding method PoE++
Max. power consumption
  • Without PoE output: 19W
  • With PoE output: 50W
PoE input 50V DC, 1A
PoE output (2) PoE ports, total 31W
Knob
  • (1) factory reset
  • (1) Dry/wet switch
Digital input Exit/Door Position Request Sensor
Output relay
  • Dry: 30V DC, 1A
  • Wet: 12V DC, 1A
Recommended max. cable length 18 AWG 20 AWG 22 AWG 24 AWG
UA-Lock-Electric (400mA) 100 m (328 ft) 66 m (217 ft) 42 m (138 ft) 25 m (82 ft)
UA-Lock-Magnetic-270kg (800mA) 46 m (151 ft) 30 m (98 ft) 20 m (66 ft) 12 m (29 ft)
UA-Lock-Magnetic-540kg (500mA) 80 m (262 ft) 51 m (167 ft) 32 m (105 ft) 20 m (66 ft)
Other locks (1A) 36 m (118 ft) 24 m (79 ft) 15 m (49 ft) 9 m (30 ft)
PoE Cabling Requirements
  • Cable 5e cabling is the minimum recommended performance category. The performance category used must match the transmission speed required at the installation location.
  • The minimum gauge of conductors that may be connected between the PSE or current injector and the PD is 26 AWG (0.13 mm2) for patch cables; 24 AWG (0.21 mm2) for horizontal or riser cables.
Operating environment For indoor use only
Ambient temperature -10 to 40° C (14 to 104° F)
Ambient humidity 5 to 90% non-condensing
Software information The software version of a product can be checked at https://unifi.ui.com
Certifications CE, FCC, IC
Document number and issue date and/or revision level UA-Hub-Door-Mini, V01
Software
Management Application UniFi Access: Version 2.5.2 and later
LEDs
PoE in System Status
PoE out Thread Status/Activity
Input/output relay Thread Status/Activity
UA-G3
Mechanical
Dimensions 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
Weight 82 g (2.9 oz)
Housing material Polycarbonate, glass
Mounting material Aluminum alloy
Assembly In wall, hallway cupboard
Weather resistance IP55
Hardware
Network interface (1) 10/100 MbE RJ45 port
Connectivity
  • BLE 4.1
  • NFC
Feeding method
  • PoE
  • UL 294 Class 2 Limited Power PSU
  • UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range 48V DC
Max. power consumption 5W
ESD/EMP protection Air: ±15kV, contact: ±8kV
Sensors Proximity sensor
Loudspeaker (1) 8 ohm, 0.7W
LEDs (1) Status light
Knob (1) Factory reset
NFC frequency 13.56 MHz
NFC reading range < 30 mm
NFC technology
  • ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
  • MIFARE Classic / MIFARE DESFIRE
  • Sony FeliCa™ (ID only)
  • NFC Forum tags T1T, T2T, T3T, T4T and T5T
  • ECP 2.0
Operating environment Outdoor use
Ambient temperature -30 to 45° C (-22 to 113° F)
Relative humidity 5 to 90% non-condensing
Software information The software version of a product can be checked at https://unifi.ui.com
UL 294 Level
  • Destructive Attack: Level I
  • Line Security: Level I
  • Endurance: Level I
  • Standby power: Level I
UL 294 statement
  • Compliance with the IEEE 802.3 specifications has not been verified as part of UL 294.
  • The equipment is intended to comply with Section 70 of the National Electrical Code, ANSI/NFPA, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE Cabling Requirements
  • Cable 5e cabling is the minimum recommended performance category. The performance category used must match the transmission speed required at the installation location.
  • The minimum gauge of conductors that may be connected between the PSE or current injector and the PD is 26 AWG (0.13 mm2) for patch cables; 24 AWG (0.21 mm2) for horizontal or riser cables.
CAN/ULC-60839-11-1 Grade Number assignment: I
Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number and date of issue and/or revision level UA-G3, V01
Software
Management Application UniFi Access: Version 3.0.15 and later
UA-Pocket
Mechanical
Dimensions 84 x 39 x 7.4 mm (3.3 x 1.5 x 0.29")
Weight 16 g (0.56 oz)
Housing material Polycarbonate, stainless steel, silicone rubber
Weather resistance IP54
Hardware
NFC frequency 13.56 MHz
NFC technology
  • ISO/IEC 14443 type A
  • MIFARE DESFire EV3 4K
  • UniFi Access proprietary security protocol
Ambient temperature -10 to 45° C (14 to 113° F)
Relative humidity 10 to 90% non-condensing
Certification CE
005-015123

Specific References

  • Name : 14 day return policy - 2 year warranty
  • Description

    Your RMA request has been submitted. We will pick up the item you wish to return within 6 days. We hope you understand that we only accept items for return if they have not been used or tampered with. Original packaging and accessories also need to be returned along with item.

    • Click here to get more details