| Hardware |
| Network interface |
(1) 10/100 MbE RJ45 port |
| Connectivity |
|
| Feeding method |
- PoE
- UL 294 Class 2 Limited Power PSU
- UL 60950-1/62368-1 LPS/PS2 PSU
|
| Supported voltage range |
48V DC |
| Max. power consumption |
5W |
| ESD/EMP protection |
Air: ±15kV, contact: ±8kV |
| Sensors |
Proximity sensor |
| Loudspeaker |
(1) 8 ohm, 0.7W |
| LEDs |
(1) Status light |
| Knob |
(1) Factory reset |
| NFC frequency |
13.56 MHz |
| NFC reading range |
< 30 mm |
| NFC technology |
- ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
- MIFARE Classic / MIFARE DESFIRE
- Sony FeliCa™ (ID only)
- NFC Forum tags T1T, T2T, T3T, T4T and T5T
- ECP 2.0
|
| Operating environment |
Outdoor use |
| Ambient temperature |
-30 to 45° C (-22 to 113° F) |
| Relative humidity |
5 to 90% non-condensing |
| Software information |
The software version of a product can be checked at https://unifi.ui.com |
| UL 294 Level |
- Destructive Attack: Level I
- Line Security: Level I
- Endurance: Level I
- Standby power: Level I
|
| UL 294 statement |
- Compliance with the IEEE 802.3 specifications has not been verified as part of UL 294.
- The equipment is intended to comply with Section 70 of the National Electrical Code, ANSI/NFPA, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
|
| PoE Cabling Requirements |
- Cable 5e cabling is the minimum recommended performance category. The performance category used must match the transmission speed required at the installation location.
- The minimum gauge of conductors that may be connected between the PSE or current injector and the PD is 26 AWG (0.13 mm2) for patch cables; 24 AWG (0.21 mm2) for horizontal or riser cables.
|
| CAN/ULC-60839-11-1 Grade |
Number assignment: I |
| Certifications |
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document number and date of issue and/or revision level |
UA-G3, V01 |