Elevator Starter Kit
Product description
Connects to elevator readers via PoE to authorize the user's floor selection. Support for up to 18 floors and digital inputs for car status and emergency.
- (1) Lift hub
- (1) G2 reader
- (2) 2-wire PoE extender
- (10) Admission tickets
UA Hub Elevator
| Mechanical |
| Dimensions |
129.3 x 244.7 x 33.6 mm (5.1 x 9.6 x 1.3") |
| Weight |
537g (1.2lb) |
| Housing material |
Polycarbonate |
| Fastening material |
Polycarbonate |
| Hardware |
| Network interface |
(4) 10/100/1000 Base-T |
| Management interface |
(1) 10/100/1000 Base-T |
| Feeding method |
PoE++ |
| Max. power consumption |
7W (without PoE output) |
| PoE input |
(1) PoE++, 50V DC, 1.2A |
| PoE output |
PoE passthrough, (4) PoE, 50V DC, total 42W |
| ESD/EMP protection |
Air: ±8kV, contact: ±4kV |
| Digital input |
(6) Auto position; Up/down/stop/full/door open/door close
(1) Emergencies |
| Exits |
(18) Relay |
| Classification |
30V DC/2A |
| LEDs system: |
white/blue/red |
| Output relay: |
white |
| Buttons |
(1) factory reset
Terminal blocks |
| Operating temperature |
-10 to 40° C (14 to 104° F) |
| Humidity |
5 to 95% non-condensing |
| Certifications |
CE, FCC, IC |
UACC-Extender-2-wire-Tx/Rx
| Mechanical |
| Dimensions |
40 x 105 x 25mm (1.6 x 4.1 x 1") |
| Weight |
PoE in: 77g (2.7oz)
PoE out: 79g (2.8oz) |
| Housing material |
Polycarbonate |
| Fastening material |
Polycarbonate |
| Hardware |
| Network interface |
(1) 10/100 MbE
(1) Homeplug AV |
| Management interface |
(1) 10/100 MbE |
| Feeding method |
PoE++ |
| Max. power consumption |
3W (without PoE output) |
| PoE input |
(1) PoE++, 50V DC, Max. 1.2A |
| PoE output |
(1) PoE+, 48V DC, 0.72A |
| ESD/EMP protection Air: |
±8kV, contact: ±4kV |
| LED |
white |
| Operating temperature |
-10 to 40° C (14 to 104° F) |
| Humidity |
5 to 95% non-condensing |
| Certifications |
CE, FCC, IC |
UA-G2
| Mechanical |
| Dimensions |
93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") |
| Weight |
82g (2.9oz) |
| Housing material |
Polycarbonate, glass |
| Edit |
In wall, hall cupboard |
| Weather resistance |
IP55 |
| Hardware |
| Network interface |
(1) 10/100 MbE RJ45 port |
| Connectivity |
BLE 4.1 |
| Feeding method |
PoE |
| Supported voltage range |
48VDC |
| Max. power consumption |
5W |
| ESD/EMP protection Air: |
±15kV, contact: ±8kV |
| Sensors |
Proximity sensor |
| Speaker |
(1) 8 ohms, 0.7W |
| LEDs |
R/G/B/W |
| Knob |
(1) factory setting |
| NFC frequency |
13.56MHz |
| NFC read range |
<30mm |
| NFC standards |
ISO 14443A, 14443B, 15693 |
| NFC technology NFC Tag 1,2,3,4,5 |
MIFARE Classic
MIFAREPlus
MIFARE Ultralight
MIFARE DESFire |
| Operating temperature |
-30 to 45° C (-22 to 113° F) |
| Humidity |
5 to 90% non-condensing |
| Certifications |
CE, FCC, IC |
UA card
| Mechanical |
| Dimensions |
85.6 x 54 x 0.8mm (3.4 x 2.1 x 0.03") |
| Weight |
5g (0.18oz) |
| Format |
ISO 7810 ID-1 |
| NFC frequency |
13.56MHz |
| NFC technology |
ISO/IEC 14443 Type A
MIFARE DESFire
UniFi Access Proprietary security protocol |
