Hikvision DS-7632NXI-I2/4S AcuSense NVR

Hikvision DS-7632NXI-I2/4S without PoE ports, AcuSense AcuSense NVR compatible with the AcuSense camera line.

Renewed, clear GUI interface.
Dual OS design to ensure high quality camera recordings.
ANR technology to secure images even when the network is disconnected.

Important specs:

IP Video input: 32-Channels/ without PoE
Two way audio: 1-ch, RCA (2.o Vp-p 1 k Ω)/Audio output: 1-ch, RCA (Linear, 1 k Ω)
False alarm filtering: 4-ch behavior (line crossing and intrusion) detection for network camera with resolution less than or equal to 4 MP
Incoming/outgoing bandwidth 256/256 Mbps< /strong> bit rate (up to 16-ch IP camera input)
VGA Resolution: 1920 × 1080/60Hz, 1280 × 1024/60Hz,1280 × 720/60Hz,1024 × 768/60Hz
HDMI Resolution: 4K(3840×2160)/60Hz,4K(3840×2160)/30Hz, 2K(2560×1440)/60Hz,1920×1080/60Hz, 1600×1200/60Hz, 1280×1024/60Hz, 1280×720 /60Hz,1024×768/60Hz
Resolution: Up to 12MP resolution recoding/live view
Decoding: H.265+/H.265/H.264+/H.264 video formats self-adapt
Capability: 12-ch 1080P decoding capability
Sata/capacity: 2 SATA interfaces, up to 8 TB for each HDD
HDMI output: up to 4K resolution
Connection: 16, RJ-45 10/100 Mbps self-adaptive Ethernet interface
Total power < 280W
Rackmountable 1U chassis
Power supply 100 to 240 VAC
Network interface: 1, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
Synchronous playback: 16ch

Note:

Incoming bandwidth to record in maximum resolution.
The NVR supports up to 14x 8MP 4K cameras due to the limited incoming bandwidth of 256MB.
Recording in a lower resolution, such as a set with 4MP cameras, the maximum number of supported cameras in the highest resolution will increase because they record in Full HD, for example, so it is then possible to use all 16 ports.

If you are unsure about the right combination of equipment, please send us a message or contact us by telephone.