Camera Module DS-KD8003-IME1/S
Camera module DS-KD8003-IME1/S for Hikvision intercom system. The camera module is always required in the system, this is the basic module to which other modules are connected.
Key features:
IP Modular intercom outpost with doorbell button
Support Hikvision access control
Noise and echo suppression
H.264 video compression video data
Good image at dusk thanks to Hikvision Low Light technology
Including Tampering alarm
Fisheye camera with infrared
Supported up to 8 'sub' modules
Size: 98mm × 99.8mm × 43.9mm
System parameters:
Processor: Embedded MCU Processor
Operation system: Embedded Linux operation system
Operation method: Physical button
Video Parameters
Camera: Low illumination 2 MP HD IR camera
Video Compression Standard: H.264
Resolution
Main stream : 1920 × 1080
Sub stream : 720 × 480
Video stream
Main stream: 1080p@30fps, 720p@30fps (configurable); sub stream: D1
BLC: Supported
DNR: Supported
WDR: Supported
Anti-flicker: 50 Hz, 60 Hz
Field of view Horizontal: 180° Vertical : 96°
Motion detection: Supported
Audio parameters
Audio intercom: Full-duplex two-way audio intercom
Audio input: Built-in omnidirectional microphone
Audio output: Built-in loudspeaker (More than 85 dB within 20 cm)
Audio compression standard: G.711 U
Audio compression Rate: 64 Kbps
Audio quality: Noise suppression and echo cancellation
Light supplement
Light supplement mode: IR supplement
Network parameters
Wired network interface: Two-wire transmission
Network protocol: TCP/IP, RSTP
Access control
Relay interface (main module): 2, NO + NC separately draw forth
Interfaces
Module connecting: 1
Tampering alarm: 1
Alarm input: 4
Performances
Card capacity: Max. 10000
User capacity: Max. 2000
Linked Indoor station: Max. 100
Linked sub door station: Max. 8
Linked door phone: Max. 8
Protocol: ISAPI, RTSP, STMP, SNMP
Unlock door: Unlock by presenting cards, unlock via Client Software, unlock via App, unlock via indoor station
General
Physical button: 1
Protection level: IP 65
Power input: 24 VDC two-wire power supply (< 16 W) or 12 VDC independent power supply (<20 W)
Power output: 12 VDC (only for power supply of submodule)
Working temperature: -40° C to +60° C(-40° F to 140 ° F)
Working humidity: 10% to 95%
Installation: Flush mounting, surface mounting
Dimension: 98 mm × 99.8 mm × 43.9 mm (3.86" × 3.93" × 1.73")
