Camera module DS-KD8003Y-IME2/NS
Camera module DS-KD8003Y-IME2/NS t.b.v. Hikvision intercomsysteem. De camera module is altijd benodigd in het systeem, dit is de basis module waarop andere modules worden gekoppeld.
Belangrijkste kenmerken:
RVS 2-Draads Modulaire intercom buitenpost zonder beldrukker
Ondersteuning Hikvision toegangscontrole
Ruis- en echo onderdrukking
H.264 video compressie videodata
Goed beeld bij schemer dankzij Hikvision Low Light technologie
Inclusief Tampering alarm
Fisheye camera met infrarood
Ondersteund tot maximaal 8 'sub' modules
Afmeting: 98mm × 99.8mm × 43.9mm
System parameters:
Processor: Embedded MCU Processor
Operation system: Embedded Linux operation system
Operation method: Physical button
Video Parameters
Camera: Low illumination 2 MP HD IR camera
Video Compression Standard: H.264
Resolution
Main stream : 1920 × 1080
Sub stream : 720 × 480
Video stream
Main stream: 1080p@30fps, 720p@30fps (configurable); sub stream: D1
BLC: Supported
DNR: Supported
WDR: Supported
Anti-flicker: 50 Hz, 60 Hz
Field of view Horizontal: 180° Vertical: 96°
Motion detection: Supported
Audio parameters
Audio intercom: Full-duplex two-way audio intercom
Audio input: Built-in omnidirectional microphone
Audio output: Built-in loudspeaker (More than 85 dB within 20 cm)
Audio compression standard: G.711 U
Audio compression Rate: 64 Kbps
Audio quality: Noise suppression and echo cancellation
Light supplement
Light supplement mode: IR supplement
Network parameters
Wired network interface: Two-wire transmission
Network protocol: TCP/IP, RSTP
Access control
Relay interface (main module): 2, NO + NC separately draw forth
Interfaces
Moduleconnecting: 1
Tampering alarm: 1
Alarm input: 4
Performances
Card capacity: Max. 10000
User capacity: Max. 2000
Linked Indoor station: Max. 100
Linked sub door station: Max. 8
Linked doorphone: Max. 8
Protocol: ISAPI, RTSP, STMP, SNMP
Unlock door: Unlock by presenting cards, unlock via Client Software, unlock via App, unlock via indoor station
General
Protection level: IP 65
Power input: 24 VDC two-wire power supply (< 16 W) or 12 VDC independent power supply (<20 W)
Power output: 12 VDC (only for power supply of submodule)
Working temperature: -40° C to +60° C(-40° F to 140° F)
Working humidity: 10% to 95%
Installation: Flush mounting, surface mounting
Dimension: 98 mm × 99.8 mm × 43.9 mm (3.86" × 3.93" × 1.73")
Material Stainless steel
